The cone crusher is suitable for crushing more than 100 kinds of medium and medium hardness materials, which are resistant to pressure and wear and wear parts. More and more users choose the cone crusher to make medium and fine crushing equipment. In actual use, many users have found that even if the cone crusher is produced at full capacity, the cone crusher capacity is still not satisfactory.
    What if the cone crusher has low production capacity? As a manufacturer specializing in the production of cone crushers, Zhongxin Heavy Industry Machinery Co., Ltd. shares some tips on the use of cone crushers to help customers improve the production capacity of cone crushers.     1. Keep the parameters of the tight side discharge port of the cone crusher unchanged.
    2. Try to ensure that the cone crusher continues to operate “full cavity”.
    3. Do not feed the cone crusher too little.
    4. The feed drop point needs to be aligned with the center point of the cone crusher inlet.
    5. Minimize the retention of buffer silos and increase the efficiency of the production line.
    6. Accurately grasp the three design upper limits of the cone crusher, the upper limit of the throughput (capacity), the upper limit of the power, and the upper limit of the crushing force.
    7. Guarantee to operate within the upper limit of the cone crusher design.
    8. Monitor and try to ensure the proper crusher speed. The speed monitoring device can be installed at the intermediate shaft and other positions.
    9. Control the fines content in the feed.
    10. The cone crusher feed height should not be too large.