The sand and gravel production line processes various gravel materials every day. These sand and gravel materials have different characteristics and therefore require different sand making machines. The problem often encountered in the use of sand making machines is that the sand making machines are blocked. The following briefly introduces the reasons, including the quality of the sand making equipment itself and the nature of the stone:
　　 1. Quality of sand making machine
Many sand machine failures are caused by the quality of equipment components and some details during the installation process. In order to avoid this situation, users should have a understanding when selecting the manufacturer of the sand machine, and carefully check the of the sand machine , To ensure the failure of the sand making machine during use and improve production efficiency.
　　 2. Install sand making machine
　　After ensuring the quality of the sand making machine, some installation points be paid attention to during the installation process. First of all, the site selection, although the installation of the sand making machine is performed by the manufacturer's technical staff, it is necessary to *vise. It is recommended that you learn some parts disassembly and assembly skills and do a good job during the installation process.
Before using the sand-making equipment, you make preparations to ensure that the sand-making equipment will not cause problems during the trial operation. You should pay attention to the details of the problem, set the discharge port and the inlet to the appropriate position, and adjust it appropriately to make the sand. The machine adapts better to the material.
　　 3. The nature of machine-made sand raw materials
　　After eliminating the problems of the sand making machine itself, let us take a look at the problems of sand raw materials. As we all know, the humidity of sand is difficult to control, and the humidity and density of the same sand are also different. These differences will affect the production of sand making machines. The size of the machined sand processing material is controlled by the crusher. If the humidity of the crushed material is too high, clogging problems may occur.
　　 It is recommended that the sand making equipment screen the gravel once during use to reduce the clogging of the gravel and improve the production efficiency of the sand making machine.