How to maintain the hydraulic system of the cone crusher

Time:2021-08-17  Writer:ZhongXin
Cone crushers are widely used in mine crushing due to their advantages of large crushing force and high output. The cone crushers produced by Jiaozuo Zhongxin include single-cylinder cone crushers, multi-cylinder hydraulic cone crushers, etc., which can be used Medium and fine crushing production of high hardness materials.
cone crusher
    Among them, the hydraulic cone crusher is improved on the basis of the traditional cone crusher, and it is more powerful in terms of crushing capacity and production efficiency. The hydraulic system is its key part. Then, if the hydraulic system of the cone crusher is carried out How about maintenance? Below, based on decades of production and maintenance experience, Jiaozuo Zhongxin engineers summarized the following maintenance tips for your reference.
    1. Ensure that the inside of the cone crusher is clean. Because more dust is generated during the processing of ore, attention should be paid to the removal of dust during use, and it also be prevented from entering the hydraulic oil.
    2. To ensure the cleanliness of the hydraulic system, it is recommended to use the same type of hydraulic oil for cleaning, if it is impossible to damage the cone crusher.
    3. Replace the hydraulic oil in time. It should be noted that the filter be used when adding the hydraulic oil. At the same time, the filter be clean. The oil be properly filled and the specified oil level be followed.
    4. Pay attention to the replacement time of the hydraulic oil. Jiaozuo Zhongxin recommends to replace the hydraulic oil while the hydraulic oil is still hot shortly after the cone crusher is shut down, so that the operating oil will help to drain the oil and deposits, and then inject new ones. Hydraulic oil.