The cone crusher has , and is mainly suitable for medium and fine crushing operations, so the product size is more uniform. Conical crushing cavity types have various plans, and users can choose different cavity types according to different needs. Among them, the standard cavity type is suitable for medium crushing, the medium size is suitable for fine crushing, and the short head type is suitable for * fine crushing.
Jaw crusher is a crushing equipment planned for various hardness rocks, mainly for coarse crushing and medium crushing. The crushing cavity of the jaw crusher is composed of two jaw plates, the movable jaw and the static jaw. The material is crushed mainly by the bending and kneading of the two jaw plates. When the movable jaw plate is close to the static jaw plate, the material is crushed; When the movable jaw plate leaves the static jaw plate, the crushed material is discharged from the lower mouth of the crushing chamber. Because of its strong crushing ability and simple operation, the jaw crusher has been widely used in industrial sectors such as mineral processing, building materials, silicate and ceramics. The difference between the two: the jaw crusher is mainly used for primary crushing, and the crushed stone is relatively large; the cone crusher is used for crushing medium-sized stones, and is *ly used for secondary crushing. The same thing is that the kneading force is applied to the materials. The degree of fragmentation is related to their structure and operating principle. The cone crusher rotates and shakes, and the moving cone rotates together to do partial pain and shake to drive the conical liner and fixed liner to knead the material; the jaw crusher is divided into a simple pendulum type and a compound pendulum type, and the movable jaw drives the flat jaw plate Do reciprocating kneading movement with fixed jaws to crush materials. In short, the former is broken by rotating and shaking, and the orbit is circular; while the latter is reciprocating and shaking, and the kneading movement is straight. Compared with the jaw crusher, the operation process of the cone crusher is continuous. The force received by the material in the cavity is the combined force of tortuous force, shear force and friction force, so it is simply broken.