Vibrating feeder is a comm used feeding equipment. In production, it can uniformly and continuously send block or granular materials to the receiving equipment. It is the * process of the entire production line. Later, it is often crushed with a jaw crusher. The working efficiency of the vibrating feeder not has an important impact on the production capacity of the jaw crusher, but also has an impact on the production efficiency of the entire production line.     Reasons for slow feeding of vibrating feeder
    1. The inclination of the chute is not enough
    Solution: Adjust the installation angle. Choose the fixed position of the height/lower feeder according to the site conditions.
    2. The included angles of the eccentric blocks at both ends of the vibration motor are inconsistent
    Solution: Adjust after checking whether the two vibration motors are consistent.
    3. The vibration direction of the vibration motor is the same
    Solution: It is necessary to adjust the wiring of any one of the vibration motors to ensure that the two motors operate in reverse to ensure that the vibration trajectory of the vibrating feeder is linear.
    4. The excitation force of the vibration motor is not enough
    Solution: It can be adjusted by adjusting the position of the eccentric block (the adjustment of the excitation force is realized by adjusting the phase of the eccentric block. One of the two eccentric blocks is fixed and the other is movable. Just loosen the bolts of the movable eccentric block. When the phases of the eccentric blocks coincide, the exciting force becomes large and decreases sequentially; when adjusting, ensure that the phases of the eccentric blocks of the same group of motors are consistent).