The impact crusher is an indispensable equipment in the stone production line. In the operation of the impact crusher, if it is properly maintained and operated correctly, it will be very useful. However, if the operating rules are not followed, the following problems are likely to occur.
Analysis and solution of common problems of impact crusher:
       1.  If the bearing of the impact crusher is found to be hot:
If the bearing is found to be hot, * we need to check whether the bearing is short of oil, and refuel in time when the oil is lacking. When refueling, please be careful not to refuel too much. Secondly, check whether the bearing is damaged. If there is any damage, please replace the bearing in time. If there is no problem with the above, please check whether the upper cover is too tight, and adjust the bolts properly.
      2.  the impact stone crusher belt flip:
  If the leather turns over, * of all, you need to check whether the lower belt is worn. If so, you need to replace the belt; in addition, check the installation of the belt, and the belt be adjusted on a plane.      3.  Abnormal vibration of impact crusher:
If the material is too large, you can check the feed size. Uneven wear, if the impact hammer head needs to be replaced, the rotor is unbalanced, it needs to be adjusted, and the foundation is not handled properly, the anchor bolts need to be checked and strengthened.
     4. The output size of the impact stone crusher is too large:
There are generally three situations in which the output size of the impact stone crusher is too large. First, the hammer head of the impact crusher is severely worn and needs to be replaced; the second check is that the gap between the hammer head and the impact plate is too large, and the * space should be 15-20mm. In addition, if the feed size is too large, it is also a major problem affecting the output. Therefore, the feeding be moderate.
Zhongxin Heavy Industry reminds you: In order to reduce the failure of the impact crusher, it is necessary to regularly check the equipment, such as checking the liner, the sealing of the machine shell and whether the screws at the joints of each device are loose. Do regular maintenance and repairs to improve work efficiency.