Working characteristics of spring cone crusher:
1. The moving cone rotates continuously, the crushing process of the material 2113 and the discharging process are alternately and continuously carried out along the working surface after the 5261 process, and the productivity is 4102 high.
2. The material 1653 is sandwiched between two cones and is subjected to squeezing, bending and shearing, making it easier to break and lower power consumption.
3. The material of the product is relatively uniform, in a cubic shape, and the wear on the working surface of the moving cone is relatively uniform. 4. Brief introduction of structure. The structure of cone crusher mainly includes frame, horizontal shaft, moving cone, balance wheel, eccentric sleeve, upper crushing wall (fixed cone), lower crushing wall (moving cone), hydraulic coupling, lubrication System, hydraulic system, control system and other parts.
5. The moving cone and the fixed cone are both upright. When the moving cone is swinging, there is a parallel belt with equal gap between the moving cone and the fixed cone near the discharge port of the crushing chamber, so that the finished material is uniform. The size of the feed inlet is small, and all materials that can be processed are the * crushed materials.
6. This series of cone crushers adopt dry oil or water sealing methods to prevent dust and impurities from entering the human body, thereby ensuring the cleanliness of the lubricating oil, extending the service life of sliding bearings and thrust ball bearings, and making the machine run reliably