Before the newly purchased PSG series compound cone crusher is put into production, it * go through a period of running-in to ensure that the parts of the machine work together in the initial stage of operation. So how does the PSG series compound cone crusher pass the trial run-in period correctly?
1. Before the trial, the operator * carefully study the instructions and operation manual provided by the manufacturer, familiarize himself with the of the equipment, and reduce the problems caused by improper operation.
2. PSG series compound cone crusher needs to run for 4 hours with no load. When running with no load, check the flexibility of the pulley, whether the machine is installed firmly, whether there are other noises, etc., and check and adjust loose parts in time. , to prevent wear and tear of parts due to looseness. 3. In the formal trial process of PSG series compound cone crusher, the work should be arranged in an appropriate amount, and the working load should not exceed 80% of the rated working load. Because in the initial stage of the use of the cone crusher, due to the influence of parts processing, assembly and other factors, the surface of the equipment is relatively rough, and it is necessary to grind off the raised and uneven parts on the parts. At this time, if the work is overloaded, it may cause damage to parts and early failure.
4. Due to the small fitting clearance of the newly put into production PSG series compound cone crusher, the lubricating oil is not easy to form a uniform oil film on the friction surface to reduce wear and tear, which is easy to cause failure, so attention should be paid to the use of internal lubrication.
Jiaozuo Zhongxin Heavy Industry Tips: As long as the user is familiar with the of PSG series compound cone crusher, standardized operation, reasonable running-in process, daily inspection and maintenance of wear and lubrication conditions, the production cost and the later production cost can be reduced. , At the same time, it can also improve work efficiency and increase production income.