Cone crusher equipment will have some abnormal phenomena during the production process, which will affect the production of the equipment. This article will introduce the abnormalities that often occur during the production of the equipment and how to solve them.
Cone crusher equipment will always have one or another abnormality during the production process. These abnormal phenomena are likely to cause certain damage to the equipment during the production process and make the equipment unable to work normally, so it be discovered in time during production. These problems can be solved in time to make the equipment work better. This article will introduce the abnormalities that often occur in the production of cone crushers.
One is the abnormal discharge. Generally, this phenomenon is caused by the unsuitable air volume of the equipment or the improper adjustment of the rotational speed of the cone crusher. Therefore, the rotational speed of the analyzer and the blower inlet be adjusted appropriately during the production process. The valve of the air pipe ensures that the particle size of the finished product produced by the equipment is not too large or too small under the normal discharge of the cone crusher equipment to ensure the quality of the finished product; The second is that frequent host shutdowns, temperature rises, and blower current drops occur during operation. These problems need to be overhauled and maintained in time during the production process to prevent equipment damage;
The third is that the equipment will be blocked. The reason for this phenomenon may be too much material, which causes a large amount of material in the main cone of the cone crusher to block the distribution plate (air duct), which causes the cone crusher to s during operation. , S and clean up in time at this time;
The fourth is the poor exhaust of the pipeline. The reason for this problem is that the circulating air flow repeatedly rubs and heats the pipe wall, which will cause the pipe wall to become wet, which will cause the material to stick to the pipe wall of the cone crusher and cause the pipe to block. It is necessary to open the residual air pipe valve of the cone crusher.