Jaw crushers are widely used in many industries due to their advantages such as large crushing ratio, stable work, and uniform particle size of finished products. However, many customers have reported that during the use of the jaw crusher, sometimes the discharge particle size is uneven. Most of this failure is caused by improper operation. How to solve the failure of the crusher with uneven fineness, we need to analyze several factors that cause this failure. 1. The motor circuit is reversed. This phenomenon is more common, causing the machine to reverse and affect the output size. Therefore, users should carefully check their work before commissioning to avoid this situation.
2. The components are severely worn. When components such as bearings and movable jaws are severely worn, the discharging particle size will also appear uneven, which requires replacement of components.
3. The size of the discharge opening. If the size of the discharge port is set unreasonably, it will have a er impact on the discharge particle size, so adjust the discharge port to a suitable size.
Fourth, the jaw plate is shifted. After the position of the jaw plate changes, the tooth and the tooth face each other. In this case, the problem can be solved by adjusting the jaw plate.